Why We Enjoy Double Glazing Door Lock Repairs (And You Should, Too!)
Why We Enjoy Double Glazing Door Lock Repairs (And You Should, Too!)
Blog Article
Double Glazing Door Lock Repairs
Are your uPVC window or door mechanism faulty? Perhaps the handles on your uPVC windows and doors are not aligned properly or are difficult to operate.
You'll be wasting energy if your double-glazed doors don't work properly. This increases the likelihood of burglaries. Owen the Locksmith can repair your door lock for reasonable costs.
Snapped Key
If a key breaks in a lock, it could be incredibly annoying. It's also potentially an issue for security, since the door may not be locked and could leave you vulnerable to burglars. Fortunately, there are some quick fixes you can attempt to fix the issue and get your door working properly again.
Be calm. If you panic you may end up pushing the damaged key further into the lock.
Then spray WD-40 or another penetrating oil into the lock to make the broken piece slide out more easily. You can also use a screwdriver to help break up any stuck pieces that might be hindering the flow. If you have a piece of the key that's stuck out then grab it using the help of a paperclip or any other thin metal object and pull it. Both methods work, but you must be careful not to push the damaged key piece further into the keyway.
Some paperclips have grooved edges that can be used as hook extractors. Jigsaw blades are also well for this. If you don't have any of these items, you can bend a hook using needle-nosed pliers. Finally, you can use a pair tweezers to grasp and pull out the remaining pieces of broken keys.
If you are unable to get the broken piece of key out, try using a lock de-icer. It's available in many hardware stores and is used to freeze any moisture that may be present inside the lock.
If none of these solutions work, it could be time to contact a locksmith. The experts at Fitlocks can quickly solve problems with uPVC door locks and mechanisms, including snapped keys and broken handles. They can also alter the double glazing door mechanisms so that they are simpler to use. Request a repair for your double glazing through us online, or give us a call to discuss your needs.
Broken Cylinder
A broken cylinder can be an extremely risky security issue. It's a good thing that it's a simple repair for a professional locksmith to complete. A locksmith will have to tap the cylinder to repair it. They can do this with a hammer or other tool, but the best method is to use a long match or piece of wire. Place the match or wire's end close to the keyway. The locksmith can then strike the lock to break it. This is better than using a hammer that could damage the lock.
Overheating is the main cause of cylinder heads cracking. This can happen when the cylinder block and head are made of various metals, such as cast iron and aluminium. Different metals will heat up and cool off at different rates. This can cause localised hotspots to expand quicker than the rest of the cylinder.
Another possible cause for cracks in cylinders is corrosion. If the cylinder head as well as cylinder block are not properly maintained, it can lead to rusting or corrosion, which may cause them to expand at more than they should. Over time, this can also cause cracks.
If your uPVC window or door lock is rigid and requires a lot more pressure to turn, it could be due to a variety of causes. This problem can result from a defective locking mechanism, or misalignment and also a worn out handle.
Fortunately it is a simple and affordable fix for the majority of homeowners with double glazing. A professional locksmith should be able to solve the issue within an hour after arriving at your residence. Based on your requirements they can change the locking mechanism, change the window handles, or change the gearboxes. A skilled locksmith will always be able to inform you of the most cost-effective solution for your home. They can even recommend upgrades to high-security 3 Star TS007 euro cylinders that will give you an additional layer of protection against burglars. It's a small price to enjoy the peace of mind that comes from knowing that your uPVC door is secured.
Broken Handle
Window handle locks have complex mechanisms that deteriorate with age and use, so it's no surprise that they can break. If yours breaks, it can double glazed repairs near me be difficult to determine the source of the problem and make sure you fix it correctly.
Whether the problem is with the internal locking mechanism or the latch, fixing the broken handle will improve your uPVC double glazing door's security as well as help you to stop drafts. Incorrectly repairing or replacing the handle could be expensive and could cause damage to the door's frame and lock, so it's worth taking some time to make sure you do it correctly.
Screwdriver When the window is open, loosen the screw holding the handle. It should be located on the inside of the back plate, and is normally hidden by a screw cover for aesthetic reasons. It is not recommended to be able to replace any internal parts of the handle, such as the levers and plates on either side. Keep them in the same order to make it easier to replace if necessary.
Next, turn the handle to make it 90 degrees to the window frame. Finally, loosen the screw at the back of the handle which holds it to the internal spindle with a second screwdriver. Once the screw is removed, you should be capable of pulling the handle off and take out the broken spindle. Replace it with a new one, making sure that it's the same length as the previous one (you can usually find these on the internet or at hardware double glazed windows near me stores) and screw it securely into the correct position. Be careful not to overtighten because this could cause damage to the handle or the window frame.
Make sure the new handle is correctly installed after which you can close and test the handle. The hope is that it will function smoothly and you'll be able to open your window once more.
Be sure to double-check that your uPVC window is shut correctly while you're working with the handle. If they're not then you may experience draughts and damp in your home as and also affecting the efficiency of your home's energy usage. Core Sash Windows double glazing near me is a local window company that can adjust the hinges of the frames of your windows to ensure that they shut properly.
Broken Spindle
It is often the case that the spindle within the handle is broken, not the handle itself. This is particularly frequent in uPVC tilt and turn windows. These types of windows require a handle that acts as a locking mechanism within the window frame. The handle is attached to a central rod that triggers the mushroom-shaped locking cams that lock into the window frame keep. If the dead latch mechanism is not able to open when the handle is turned it is likely that the spindle is broken, this can be an extremely frustrating issue.
There are solutions to click here this issue. A professional locksmith can quickly and effectively address this problem. A professional locksmith can disassemble the handle of the window by using a tool that removes the wheel portion where the spindle is here located. This can be done without damaging the handle or causing other damage to the frame of the window.
After removing the wheel, the technician can inspect the spindle and identify the cause of the break. This involves breaking the spindle into its component parts and meticulously noting their general condition as well as any particular areas of wear or damage. This process is usually carried out by technicians in a clean environment.
Next, clean the damaged spindle. This will remove any dirt or other debris that could be hindering it from working normally. The spindle could then be repaired or replaced. If it's being replaced, the technician will need an identical dowel size to the one used in the first and drill mating holes into both pieces of the spindle. This will ensure that the spindle will fit perfectly with the handle.
If the damaged spindle is beyond repair, it could be necessary to replace it completely. Home centers sell generic replacements, but if your window style is rare you'll need to contact an expert in cabinet making or woodworking who can replicate the exact piece. Once the spindle has been installed, it can be attached to the handle. Place the screw holes on the handle to the screws that are already in the frame. Once the new handle is firmly seated you will be ready to operate your uPVC window.